This is my long overdue review of the StF2 3 wood. Great for the mid-handicapper and will also appeal to some lower handicaps as well.
I was not able to find any videos on how to properly use a spec gauge. With the help of Tom at Wishon Golf and Jim at Golfworks, they guided me on how to properly measure the loft/lie for irons/putters…
Today we are breaking down a Callaway Epic Flash driver and rebuilding it to 48 inches. I will show you how to build it and give you tips to make this project successful. Callaway PreOwned Website:
We look at the ruler and level app on the iPhone to see if you can use them to measure golf clubs. It’s a battle of the iPhone vs. my shop tools to see how accurate the iPhone is for…
If you think you understand the relationship between the inside diameter of a golf grip and the shaft, you should watch this video.
Materials Needed: 1. Grip of your Choice (Can never go wrong with these!): 2. Double Sided Grip Tape: 3. Masking Tape (for adding layers): 4. Grip Solvent: 5. Hook Utility Knife: 6. Vise Clamp: OR Regripping station: Blog Post: Music…
Materials Needed: 1. Grip Solvent: Golfworks 2. Grip Saver: Rubber 3. Vise Clamp: OR Regripping station: Blog Post: Music Credit:
Before you start, your putter must be: * Removed from shaft * All nicks and dings removed * Paint-fill removed (100% of it! – otherwise it will bleed through the polymer and make a sloppy finish) * Sandblasted with 180…
Materials Needed: 1. Paint Stripper: 2. Tamiya Acrylic Paint: 3. Applicator Bottles: 4. Precision QTips: 5. Acetone and Paper Towels Blog Post: Music Credit:
Materials Needed: 1. Bench Grinder (with 1/2 inch arbor holes): 2. 6 x 0.5 x 0.5 inch deburring wheel: 3. Eye Safety Wear Blog Post: Music Credit: