드디어 소원성취한 최강 집탄의 MARKSMAN PCC IX AR9 (#Feat VFC)

▼안녕하세요, AIRSIX입니다.
이번 영상은 MARKSMAN에서 출시한 PCC인 IX AR9입니다.
글록 순정탄창을 사용한 PCC가 몇몇 제품이 출시되었지만 실사용기가 기대이하였는데
과연 이 제품은 어떨지 영상으로 보시죠~

▼구독과 좋아요는 저희가 영상 제작을 하는데 큰 힘이 됩니다.

에어소프트 구매는 네이버에서 테그아트를 검색해주세요.
https://smartstore.naver.com/tagart

▼현명한 소비에 도움을 드리기 위해 여러분의 시간과 돈을 대신 소비해드리는 에어소프트의 모든것, AIRSIX TV입니다.

▼에어소프트 유저들을 위한 세상 모든 에어소프트 리뷰영상을 제작합니다.

▼광고 및 협찬 문의
E-MAIL – airsix.airsoft@gmail.com

▼타임스탬프▼
00:00 INTRO
00:27 AR9 소개
01:23 분해 – 구조 확인
03:32 성능확인
04:02 익스트림 슈팅
05:00 엔지니어 스캔
06:47 게이머 스캔
07:35 맺음말

▼ English subtitles, Deutsche Untertitel,, Subtítulos en español, 日本語字幕, 中文字幕, คำบรรยายภาษาไทย

#MARKSMAN #AR9 #VFC #AIRSIX #GLOCK

Hello, this is AIRSIX TV Park Sang-hyun. Hello, this is Seonho Jang. Today’s rib is the IX AR9 released by MARKSMAN. I heard that real guns are also very popular with PCC. Finally, an AR that uses Glock magazines for airsoft guns has been released.

There were products that were previously released, but they were not very popular because they had some problems. People who used the VFC Glock can use the existing magazine or use it as a PCC for shooting matches, and since it is compact, I think it will be good for gaming as well.

Is this the model that is also missing? There is no engraving, but it is the design of a model called AR 9G from Wilson Comeback. Of course, the rail design is different, but it was CNC machined, and if you look closely, the receiver was also CNC machined. CNC machining at this price?

This product doesn’t seem to have been completely mass-produced, so I think it may have been CNC processed. And Papago Arms recreated the Wilson Combat AR9 by adding engravings and attaching original parts based on this product, and they

Said the receiver system was good. Because there is an engraving, I am more inclined to buy the product. Let’s take a look at it first. I want to change the grip and stock of this, but can I also fit the original Magple grip?

Of course, original parts can be installed on the stock, but the grip insert area is a bit wide, so Magpul Ori cannot be installed. However, replica products can be installed if you insert them with a bit of force.

I think the magazine angle is a little more upright than the TWS from King Arms. Looking at it, it seems to have the same angle as a real gun.

This gun uses a Glock magazine, and because of the angle of the gas root, it has to be tilted a bit more along the grip angle of a normal Glock, but in this gun, the inside of the bolt carry is sloped like this along the gas root.

Ah, so the hanging angle allows it to stand a little longer. I think the balance is really good, probably because the magazine angle is a little more upright. The bolt carrier is made of aluminum alloy, perhaps for operability, and the hammer cocking and bolt catch parts are reinforced with steel parts.

The Hammer Group looks like a VFC product. The basic hammer group is a VFC product. Of course, the valve knocker side was newly manufactured to fit the Glock magazine. Ah, somehow the trigger sensitivity is similar to VFC.

Overall, the product finish and structure of parts can be seen as actually being produced by VFC. So Marksman is also VFC? Some people think of Marksman as a shell company of VFC. They say that although they receive parts from VFC, they are actually a different company.

Unlike VFC, this is not a guided hop method, but hop-up control is adjusted directly for the rail. The vfc guide hop-up had poor structural stability and thus poor coal collection, but this product seems to have attempted to improve hop-up safety while simplifying the parts by adjusting it directly from above.

When I adjusted it with the L wrench, a click was detected. If there is no clicking feeling, you have to turn it by feel when adjusting it, which is inconvenient and may come loose during use. However, since

This hop-up seems to be applied fairly evenly, I think it is worth looking forward to the bullets.

The bullets are 10~40mm, and as soon as you open the box, it is very easy to use. It showed a decent amount of bullets. At this level, you can use it right away without any need for customization.

The recoil of the handgun magazine is a bit weak, and normal operation seems to be around 50 rounds with a count of 87 rounds. The long magazine has decent recoil and has a total count of 120 rounds, and normal operation is about 80 rounds.

Glock long magazines are more susceptible to cooling, but this doesn’t seem to be a bad thing. Oh, as expected, the bullets were very good. I think this is because there is no NPAS and the hop-up structure is stable. So, this would mean that VFC genuine hop-up rubber is also quite usable.

I’m designing a hop-up rubber, but I’m looking at products from a lot of companies. However, looking at the hop-up rubber alone, this VFC product is also a very well-designed product. So, ultimately, the problem was the structure that controlled the hop-up.

And as I was shooting the gun, the pins at the bottom slowly came out. This pin is the same as the vfc AR product, and the structure of pressing it into the groove on this pin with spring tension to prevent it from coming off is the same.

However, since this gun uses Glock magazines, the hammer spring is weak, so it seems that it cannot hold this pin and falls off. For this part, I think I need to process the groove a little deeper or apply a small amount of instant adhesive to fix it.

Ah, the hammer spring was weak, so the trigger pressure was a bit soft. If the hammer spring is strong, it may create resistance during blowback, and if the amount of gas emitted increases and supercooling becomes severe, it may not function properly.

When I tried using it, I heard that the bibilip was very scratched and the bolt catch was not working.

The part that raises the bolt catch is designed to be a bit sharp, but due to the clearance in the magazine insertion hole, it seems like it gets caught on the sharp part when inserting the magazine. I think this part can be solved by grinding it very slightly at an angle.

Also, due to the clearance of the cartridge hole, there are cases where the bolt catch is not in the correct position when inserting a magazine. This can be solved by attaching tape to the inner wall of the receiver to reduce the clearance.

I think this level of performance is really good, but I think it’s a bit disappointing that it can’t be changed to a different rail due to the unique hop-up structure.

If you remove the hop-up adjustment part, the VFC guide hop-up can be installed and you can change to a different rail, but I wonder if there is a need to give up the group and change it. Well, I guess if I wait, a rail with the original design will come out.

What do you think after using it? It definitely has better recoil than King Arms TWS and I think you can use it in a match right out of the box.

Of course, there are some restrictions when it comes to replacing rails, but I have some expectations that I might be able to make a match grade PCC. The gun is light and short, so I think it’s good for gaming.

First of all, VFC Glock users can share magazines, so I think they can create a fun loadout by using Glock for handguns and AR line for rifles. That’s right, but if you use the standard Glock magazine, the recoil tends to be a bit weaker during rapid fire.

It’s definitely weaker than when using a long magazine, but that’s resolved to some extent by adding White Puff Dino. Overall, it’s not as good as the AR from VFC, but I think the level of completion is quite good.

Today, we looked at the new product MARKSMAN IX AR9, one of the popular pcc products for real guns. It looks great and works well with collecting charcoal more than expected, but it has the disadvantage of the pins falling out easily. This part can be easily solved, but it is a bit disappointing.

This gun is sold overseas for about $380. I think this would be a good product for those looking for a small and light rifle or match PCC. That’s it for today. This was Park Sang-hyun of AIRSIX TV. It was Jang Seon-ho.

Since we can now participate in PCC on Thursday, shall we set up a PCC like this? You have MPX. Would you like to set it up?