EQUIPMENT

DONT CUT YOUR GOLF GRIPS OFF, how to re grip your clubs while saving the old ones #golf



using a specific tool to save grips when changing your golf grips.

GolfWorks V-Groove Grip Remover Saver Gripping Tool https://a.co/d/bNfMjct

my website

https://www.bacustomproducts.com/

#gspro #golfsimulator #golf #Grip #regrip

Oh hey there finally got a little tool this is to take the grips off of your um golf clubs here I have no idea how it’s going to work uh I have regripped quite a few clubs what I haven’t done is actually tried to save them so I don’t really care this is

My well I care about the driver I don’t care about this grip um I would normally just cut it off and then slap the new one on I got some new ones Golf Pride I have a few different new ones but these are the ones I’m going to

Put this on um I’ve regripped my buddies with these I’ve regripped one of mine my three-wood and I really I like these they’re they’re pretty good they’re a little bit bigger they’re like the jumbo ones the plus four gray so they’re kind of big uh the reason I want to do that

Is I’ll grab my one iron here when I did this one I kind of screwed it up so this is my one iron on I put one of these big fat jumbo grips on it which I like I just I want it off

My my one iron and I want to put one of these on and I don’t want to wreck it because I think I just I didn’t get it seated all the way so um might put it on something else like another driver shaft at some point for fun and

Get used to that but I want to be able to save this so put that over there so I’ll do that after that’s why we’re going to test it on this because if I end up breaking this grip I don’t really care uh it’s just

Going to go in the garbage if I if I save it it’s not going into garbage so I got some mineral sprits and far as I know you just Jam this thing in there so I got my grip solvent here and I think that’ll come into play after I

Have my mineral Spritz I don’t know how I’m going to dump it but we’re going to figure it out said you know I’ve never used the mineral Spritz to do this cuz I’ve never needed it I’ve just cut it off and then rubbed off the glue or whatever

So we’re going to play with this we’re going to jam it in and see what happens um get you a little bit clearer view of I got to get a new camera one of these days but let’s try to so apparently it’s supposed to jam this in and open it

Up and then dump the mineral Spritz in so we’re gonna try I don’t yeah I mean this might be a dumb tool I just bought it to see okay okay we got it in there I am not too concerned about breaking this we’re going to go over the garbage can

Here get you out here can’t zoom out in this mode but all right going to kind of work this in there as far as I know you just dump it in and it works I wish I had I got little cups here from when I was doing some metal

Etching or I know salt water and a 9vt battery to ET some stuff so we’re just gonna dump some of this in there maybe that’ll start loosening it up oh yeah holy cow okay let’s open it up again I think there’s like a line here you just dump

Stuff down into and it goes in okay we’re going all the way through okay boy oh I’m wearing dirty pants but the wife’s going to kill me if I get this shirt dirty ow all right okay needs a little bit more I’m just going to really liberally use this stuff dump it in

There get in there eat that okay oh I’m actually able to work my way around now holy cow all right I actually think the grip is coming off if I grab some towels if I can rip it off here all Right all right make sure you leave comments if there’s a better way to do this because I like doing stuff the hard way I’m sure I could have watched a YouTube video and actually learn how to do it so hopefully you’re not here to learn stuff

You’re just here to watch me do stupid let’s get more there let’s really loosen that up huh seems to like this tool in this here we go look at that I’m spinning all the way around now oh and she broke free look at that all right I got it

Off all right that’s neat Let’s uh clean this tool and again I’ll link this tool but honestly uh it’s just a flat piece of metal I think this thing was like 30 bucks 19 bucks on some of them but so just get a flat piece of metal and do it yourself

Um I’m not gonna take this paper off don’t think I need to I’m going to put a new one on it going burn out but I was able to save this grip so that means I’ll be able to save my nice jumbo Max one all right I’m going to get this

Ready for the next grip and I’ll bring you back in all right so I got my club and a vise here set up how I want it kind of angled where I want it no not yet there we go be able to adjust that kind of straight up and

Down I basically just eyeball this so you got these little these Vice things um so that’s in there holding that so you’re not wrecking your club uh and I’ve done this quite a bit for friends myself uh the first it was just taken uh taking a grip

Off and saving it is what I’ve never done which is cool that I can do that now again I don’t know if this tool is worth it as far as price it uh I could have made something out of metal but if you’re not going to make

Something and you want to save your grips that’s definitely the way to go so I got my grip solvent here I am going to throw some gloves on because that solvent can be kind of Ruthless actually we’re going to put the tape on first so I got this tape and it can go

Right over this no problem I’m just going to copy it and you want it to stick off the back just a little um I don’t really know if there’s a Rhyme or Reason to a lot of this but I have had a 100% success rate on this stuff working so regripping your

Clubs is super easy peel that tape off the biggest thing you want to be extremely cautious with is you need a lot of this solvent like like it should be dripping I tell you we are going to shove this on I’m going to find my lines I’m going to line it up like

This and that’s only for you you know later on when you’re holding it it’s off what you really want to make sure is you’re pushed all the way on and your grip is kind of seated nicely you’re not bunched up and you’re not hanging off so it’s wobbling in your hands okay now

We’re going to put gloves on uh this is a little knife all these little tools come in you know you get a kid on Amazon of the cheap grips to be able to do all this stuff yourself it’s super easy then you can buy like the higher

End grips you just get the cheap stuff from Amazon for the tools okay we got that on now we’re gonna this is kind of easy part let’s see I’m just going to absolutely soak this right just really wet really wet I’m going to take this I got my garbage can

Underneath here I got the now I’m going to soak this okay I’m going to put more in there now I’m covering the bottom I’m going to shake it up and then I’m going to let it drip on there okay find my line and we’re just going to push there

We go and we popped out the end now I want to make sure everything’s lined up we’re not crooked at all Golf Pride in here you have a little bit of working time here not a lot make sure you’re good okay all right we’re not we’re not lumpy in certain areas here

Okay I’m looking and I like it maybe just a hair turn all right okay now I kind of clean that up make sure we are tight on there push down and that will sit on there now I’m just going to let it sit there for a second because you can take it off

And you can move it so like if you’re doing it for someone you can pull it off and you have a little bit of working time in order to make sure it’s good in their hands and everything so yeah that’s as easy it is as it is to

Regrip your club uh I like I said I’ve regrip clubs what I haven’t done is use that tool so don’t ever feel like regripping your Club is a hard thing to do right so yeah we got it there it’s looking good it’s uh you know lined

Up we’re going to let it dry a little bit and then I’m going to see how I like it and then I’m going to do my my one iron we’re going to do the same thing you can you know if you watch this that’s thank you uh the the how-to

Part is done now I’ll just kind of Yap a little bit randomly and do my other one so yeah Built My simulator here again if this is your first time here you know please like And subscribe it’s nice to have those subscribers to be able to keep doing

This and making cool stuff I have a few other cool videos now we’re going to throw these in the stove and get that going it’s kind of it’s really cold out all right I did I bought these jumbo grips I can’t remember what this one

Is I think I want to say this one is the medium of the jumbo ones I think it’s this like the same stuff like that Bryson uses and stuff it just I don’t have the big enough you know hands they’re not not my favorite so we’re

Just going to pop it off because I might want to put it on there later so pop this one off in the same manner because this is the one I really want to save I will end up saving that other one now this is a service I offer to my

Friends stuff I kind of will regrip their clubs I don’t know if I’m going to get this one off oh boy might have to do it in a different way so give you guys a view here yeah I don’t I just I got to be able to open it

Up dump the mineral Spritz in and then I think it really starts eating away at that glue all right let’s uh yeah this is a the tidalist u505 um one iron I saw it and I had to have it as a hazard of smoke um extra

Stiff shaft on it I think it’s extra stiff and it just I saw it and I I put this grip on it was me just screwing around but I think it was 150 bucks or 125 is what they charged me so it’s just

A fun thing to have in the B I also got an 80 I do have an 80 degree as well so when I hit the course for fun I like to bring those along just to kind of show some stupidness I don’t know I need something that’s going to get under

There like a maybe this little screwdriver to get me started and then I can dump the mineral Spritz in there there we go all right so we’re opening it up so that seems to be what you do you just open it up a little bit and your mineral Spritz just goes to

Work so now if I can get this in there and at least I know that these here’s just like the random sticky things I’ve been grip sticky things Golf Works they’ve been working pretty well I bought them there’s no paid anything here I’m you know I don’t think you get sponsors for

YouTube videos that make 20 30 views so all right gonna put that in there I wonder if I can turn it oh think once I get a lot in there it starts going feel it kind of tearing itself there you go all right look at yeah I just need to go a little

Deeper look at that we got her off I’m going to pop that on the floor get that out of here now we’re going to clean some of this stuff up look at that I mean that had that had a full one of these on it that mineral Spritz just ate it up and

Ripped it off it’s cool all right clean that up now if I’m doing this wrong like if you shouldn’t be getting mineral Spritz on a carbon fiber Shaft or or whatever these shafts are made out of or maybe it shouldn’t be done on a steel shaft if I ever do other clubs let

Me know in the comments um what kind of makes this easier I’m pretty sure I’m doing things wrong so you can tell me what I’m doing wrong let me know like subscribe comment tell me how dumb I am for screwing this up or for you know using a 80

Dee and a one degree in my golf bag all right let’s bring you over here again and we’re going to do that same setup all right this is a thick the thick boy shaft all right so do this again round two always make sure you got a bunch of

Napkins you got your garbage can underneath got my gloves on I’m going to soak this little thing just really get it in there um I’ve used a few different grip solvents this is what I’m using now again not sponsored it’s just the stuff I recently bought it

Works uh and I’ll probably keep getting it just because it works it’s cheap gives me a lot of play time so I’m going to squirt this in there now I’m going to plug it squirt more grab it shake it around on want to make sure there’s a lot on that end

Really get it in there okay and then squeeze and it beat on me that’s fine okay now I’m going to line everything up make sure we’re pushed in good make sure we’re aligned line line line there we go okay all right and it’s just easy as that that’s how you regrip a

Club um yeah cutting them off is super easy so if you have old grips just you get the tool or any any hook blade you know you can get hook blade they’re called Roofing blades uh you can get them for any xacto knife or Carpenter knife uh this

Is what came with my little kit but you don’t have to buy the special knife or anything just as long as you got a hook blade you cut it comes right off um and then you just as best you can clean off the the goo you don’t have to take

The um stuff all the goo off of it I didn’t really get on that so we’re just gonna clean that everything’s good all right now since I want to test them we’re going to get the simulator going Alexa we want to golf okay now you can see over

Here my sky track computers and stuff are going to turn on watch that again if you watch my videos you probably seen that before so that’s all turning on all right so yeah I mean like I said I’ll just link this I don’t know if this

Should be sharp it didn’t seem to matter once I kind of figured out what I was doing it wasn’t wasn’t hard I think it was just user err right out the get-go you push it in dump a little bit that mineral sprits kind of move it around a

Little bit more mineral sprits and you just keep inching this thing in with more mineral sprits and it just eats away and you just turn that club and it finally just pops off so that’s kind of cool so now I mean I’m am GNA save this

Grip but this is the one I really wanted to save um just in case I want to put it on something else later on so we got two useful grips I’m sure there’s stuff in there I’m going go put the password in here um and then come

On all right and now that’s just going to kind of load up and I can get my golf shoes on trying to get this fireplace going my heater’s gone and my wood stove it’s super cold out but the wood stove isn’t going that well so I can monkey around with that a

Little bit a second all right once this is ready I’ll bring you back in I have videos on how this works and does itself so go watch those all right so I took a whack my head was loose so I tightened her up I like the feel of

This so we’re going to give her give her a quick whack here for you guys and we’re going to see if I can’t get her going left right has been my problem recently and if you watch my swing you might be able to tell why let’s see if I

Can’t not come over the top no did it again yeah hard all right let’s do it let’s do it again come on we got to get you guys a good drive here after regripping the clubs one of these days people are G to stop watching I’m so bad at golf come on all

Right I’m okay with going left I I tried to go left cool all right well I do like these grips I just gotta you know work on that drive and stuff so we’ll see you later

3 Comments

  1. I remove dozens of grips monthly, mainly new grips but the wrong size for the owner. I prefer the bar method over air as i have lost a lot of grips warping and blistering.
    I use a bricklaying point tool $10, You can even remove superstroke putter grips.
    Club needs to vertical on a bench, use a spray bottle a lightly spray just in side the gap opened by the bar into the grip this lets the solvent search down the grip.Good luck,

Write A Comment